天然橡胶
RUBBER LATEX
品牌:桔子
产品编号:V12088
CAS号:9006-04-6
分子式:C5H8
分子量:68.11702
天然橡胶
| 中文名称 : | 天然橡胶 |
|---|---|
| 英文名称 : | RUBBER LATEX |
| 中文别名 : | 未提供 |
| 英文别名 : | 未提供 |
| CAS号 : | 9006-04-6 |
| 分子式 : | C5H8 |
| 分子量 : | 68.11702 |
| SMILES Code : | 尚未取得 |
| MDL NO : | 尚未取得 |
| Pubchem ID : | 6557 |
| InChIKey : | RRHGJUQNOFWUDK-UHFFFAOYSA-N |
实验性质
| 外观 / 形态 : | Isoprene, stabilized appears as a clear colorless liquid with a petroleum-like odor. Density 5.7 lb / gal. Flash point -65 °F. Boiling point 93 °F. May polymerize exothermically if heated or contaminated. If polymerization takes place inside a closed container, the container may rupture violently. Less dense than water and insoluble in water. Vapors heavier than air.;Liquid; Other Solid;Colorless liquid with a mild, aromatic odor; [HSDB];VERY VOLATILE COLOURLESS LIQUID WITH CHARACTERISTIC ODOUR. |
|---|---|
| 颜色 / 形态 : | Colorless volatile liquid;Colorless, watery liquid;Nearly colorless and transparent in thin layers.;Amorphous when unstretched, but has oriented crystalline structure on stretching /Cured (unvulcanized)/ |
| 气味 : | Petroleum-lke;Odorless |
| 沸点 : | 93 °F at 760 mmHg (NTP, 1992);34.067 °C;34 °C;34 °C @760 [mm Hg] |
| 熔点 : | -184 °F (NTP, 1992);-145.95 °C;The generally accepted crystal melting temperature of natural rubber is 30 °C.;-146 °C;-146.7 °C |
| 闪点 : | -65 °F (NTP, 1992);-65 °F (-54 °C) (Closed cup) |
| 溶解性 : | less than 1 mg/mL at 70.7 °F (NTP, 1992);In water, 642 mg/L at 25 °C;Practically insoluble in water;Miscible with ethanol, ethyl ether, acetone, benzene;Soluble in alcohol, ether, hydrocarbon solvents;Natural rubber is soluble in most aliphatic, aromatic, and chlorinated solvents, but its high molecular weight makes it difficult to dissolve.;Practically insol in water, alcohol, dil acids, or alkali; sol in abs ether, chloroform, most fixed or volatile oils, petroleum ether, carbon disulfide, oil of turpentine.;Raw rubber dissolves (or at least swells very strongly) in many organic liquids such as benzene, petroleum ether, crude petroleum, and carbon tetrachloride. In contrast, vulcanized rubber can only swell because the chemical cross-liking prevents dissolution.;Solubility in water, mg/l at 25 °C: 642 (very poor) |
| 密度 : | 0.681 at 68 °F (USCG, 1999) - Less dense than water; will float;0.679 g/cu cm at 20 °C;0.906-0.916 g/cu cm @ 20 °C;Relative density (water = 1): 0.7;0.679 @ 20°C |
| 蒸气压 : | 400 mmHg at 59.7 °F ; 493 mmHg at 68 °F (NTP, 1992);550.0 [mmHg];VP: 400 mm Hg at 15.4 °C;550 mm Hg at 25 °C;Vapor pressure, kPa at 20 °C: 53.2;400 [mm Hg] @550 °C |
| LogP : | log Kow = 2.42;2.30 |
| 自燃温度 : | 743 °F (USCG, 1999);743 °F (395 °C);220 °C |
| 热分解说明 : | When heated to decomposition, it emits acrid smoke and fumes.;Decomposes at 120 °C.;When heated to decomposition it emits toxic fumes of sulfur oxides (SOx). |
| 黏度 : | The viscosity of natural rubber can be stabilized with the addition of small amounts of hydroxylamine hydrochloride or semicarbazide hydrochloride.;0.3 mm²/s at 20-25 °C |
| pH : | Natural rubber latex has a pH of 6.5-7.0 when it emerges from the tree. |
| 折射率 : | Index of refraction: 1.42160 at 20 °C/D;Properties: Chemically unsaturated, not stable to temperature changes (thermoplastic), readily oxidizable by mastication; soluble in acetone, carbon tetrachloride, and most organic solvents; refraction index 1.52; dielectric constant 2.5. Processed by calaendars and extruders; can be injection-molded with low sulfur and high accelerator. Cured by hot-molding or in open steam, at temperatures from 120-150 /degree/ C after addition of 3% sulfur, 1% organic accelerator, 3% zinc oxide, plus fillers or reinforcing agents. The only factors of significance in vulcanization are the time of exposure to heat and the temperature used. /Crude (unvulcanized) natural rubber/;Index of refraction: 1.5195 at 20 °C /Ribbed smoked sheets/;Index of refraction: 1.5218 at 20 °C /Pale crepe/;Index of refraction: 1.52 /Cured (unvulcanized)/ |
资料来源:天然橡胶产品资料页;来源页标注 PubChem CID 6557,资料日期 。
质检证书(COA)
摩尔浓度计算器
启用 JavaScript 后可使用摩尔浓度计算器。
